PSSST - Scroll to the bottom of this page for an exclusive Frostwave Offer...


<< FROSTWAVE ANALOG FLAVOUR
<< bringing you the old school SOUNDS that defined modern electronic music


THE FROSTWAVE QUAD MIDI TO CV PLUS
Midi to control voltage convertor.....

Put some real analog
groove into your midi set-up






>> WHAT IS IT ?

Before MIDI modular analog sythesisers 'talked' to each other in
a non-digital (of course..!) protocol known as Control Voltage
which is most often reffered to as CV.

The Frostwave Quad MIDI to CV plus can convert a MIDI signal being
produced by your computer or workstation and translate it so it can control your modular analog synth....

Or your effects pedal with CV control inputs such as

your Resonator




and your Blue Ringer V2 ring modulator



Which means you can generate REAL ANALOG
TWEAKABLE progressions in your MIDI based compositions...

The Frostwave Quad Midi to CV plus is

>> SIMPLE TO USE

Don't be intimidated by the Techie Jargon if you are interested
in exploring mixing in some true analog into your
digital midi setup....

the Frostwave MIDI to CV plus has all the
versatility and features that any home project or studio
would require in controlling CV equipment.


"I use or have used a Korg MS-10, MS-20, Moog Source, Roland SH-101, Sequential Pro-1 and various CV controllable pedals - Resonator, Mooger Fooger CP-251 Control processor and MF-104 delay pedal

it works flawlessly with everything I've hooked it up to and it's built so solidly I could probably use it to defend my home against intruders"

Christine White, Brooklyn, NY

(email:cwhite@interport.net)



>> WHAT DOES IT DO?

The Frostwave Quad MIDI-CV Plus is a rack mount four channel MIDI to analog convertor, designed and manufactured in Australia. The unit operates in three different modes:

1. As a basic four channel convertor, it interprets MIDI note number, velocity, and note on/off on any four adjacent MIDI channels and produces corresponding control voltages and gate voltages to drive up to four analog mono synths.

Or to control your FROSTWAVE RESONATOR and/or FROSTWAVE BLUERINGER V2

Switches enable each channel to be either volt/oct (Roland, Moog,Arp etc) or Hz/V (Korg MS series). Gate polarity can be either positive or S-trigger (Moog) type. Pitch bend information is interpreted on each channel via a 16-bit DAC and added to the control voltage to give smooth glides. There is a DIN sync output for early drum machines, locked to the MIDI tempo.

2. The second mode is for modular systems, with various MIDI controllers being interpreted from one channel. Eight continuous and four gated outputs are available.

3. In the third mode, the unit is used as a MIDI controller. Plugging a standard analog games joystick into the unit allows samplers etc. to be triggered by the fire buttons. Moving the joystick changes the notes and volume.

Other Uses:

Apart from the obvious, the Frostwave Quad MIDI-CV can be seen as a source of MIDI controlled 0-10 volts for lighting controllers, voltage controlled amplifiers, voltage controlled filters etc. Much pre-MIDI studio gear such as Lexicon used this type of control.

Any analog monosynth can be converted to a MIDI controlled filter processor by modifying the synth to give an insert point between the VCA and VCF. This enables modern effects processors to be used on the basic analog signal, while the filter frequency cutoff now is under MIDI control. Also, any sampler can be given a resonant analog filter, by sending the sampler audio out to the filter input and simultaneously triggering the analog synth via the Frostwave Quad unit! If two voltage controlled amplifiers are available, they can be arranged to give a MIDI-controlled "flying pan" effect by driving them out of phase from MIDI continuous controllers.

The Quad MIDI-CV makes an ideal 'front end' for specialist effect devices, since all the most difficult part - converting MIDI information to stable and precise logarithmic or linear voltages and switching level outputs - is already done.

It is also possible to use the device in its reverse mode to generate MIDI information from transducers giving control voltages in the 0-5 V range.


>> EVEN THOUGH OUR GEAR IS BUILT LIKE TANKS, WE GIVE YOU A THREE YEAR WARRANTY, JUST IN CASE...

The fact that we are in Melbourne Australia and that you are in New York, London, Tokyo, Olso or Moscow
(or any other destination we have sent Frostwave to in the last 3 years) you will have the peace of mind that you will get complete support.... our excellent rating for customer support can be seen in our Harmony Central Reviews...

These customer support rating are from Frostwave's
Harmony Central User Reviews
...

Customer Support: 10 out of 10
"Paul Perry is a really nice guy who's always been very responsive to any of the dumb questions I've asked him. He's responded by the next day, which is all I can ask from a person who lives on the other side of the world. I'm not the most technically savvy person by a longshot, and he's helped me to understand a few of the ins and outs of the box. He obviously is very enthusiastic about what he does for a living. In addition, you get a three-year warranty, I believe."

Customer Support: 10 out of 10
"Handmade by Frostwave, which is based in melb. Australia. Spoke to the builder via email and he's really cool and friendly."

Customer Support: 10 out of 10

I purchased this over the net. It took about two weeks to get it (from Austrailia). I've had it a couple weeks. These people are way cool. Professional yet unpretentious (a hint of tannin and a strong bouquet). ROCK and ROLE DUDES!


Customer Support: 9 out of 10
"
They send me offers for other equipment and keep in touch with me. I've emailed them twice and they responded pretty quickly. One was a question about the order and they informed me up immediately. the other was a thanks for telling them how well it works."

Customer Support: 9 out of 10

" Frostwave are very helpful and friendly. It's run by a guy who you can speak to directly. The company has the feel of a local business.


>> HOW CAN YOU TRY A FROSTWAVE QUAD MIDI TO CV PLUS RISK FREE ?

When you order Frostwave Gear from us we give you a 30 day money back
guarantee... if you don't like it, then ship it back and we will refund your
money.

This may seem a little over the top or too good to be true but it's not.
We are a small operation that wishes to stay small and stay loyal to our customers
and the people who use our gear.

This offer is my invitation to become one of the people who
have discover the distinct, flexible and unique sound possibilities of Frostwave gear


>> ORDER YOUR FROSTWAVE QUAD MIDI TO CV PLUS DIRECT

Click here to purchase The Frostwave Quad Midi to CV Plus via our
secure shopping cart from Warm Cola and receive...

* We will include the 16vac power supply sutable for your countries outlets. So you can just open the box and start tweaking immediately

* A unit that has surpassed any customer expectations that we confidently offer you a
30 day money back guarantee.

* The peace of mind knowing that your most precious sound creation tool is covered by Warm Cola's exclusive 3 year warranty.

* The added saving of purchasing in Australian Dollars, which means a huge saving for those purchasing in most foreign currency's..

* As a Frostwave Customer you will be privvy to some excellent offers on current and new products...


click here click here to view prices and shipping costs

Order today and have your order shipped
within 10 days anywhere in the world.....



Click here to order a Quad Midi to CV from the Frostwave Workshop


All content is © 1999-2002 WARM COLA 6/249 Rathdowne Street Calton Victoria Australia 3053, phone: +613 9347 5853